NH2-UiO-66金属有机骨架材料 CAS:1260119-00-3

NH2-Uio-66

NH2-UiO-66金属有机骨架材料 CAS:1260119-00-3

材料名称:NH2-UIO-66(Zr)

CAS1260119-00-3

单位分子式 C48H5N6O32Zr6

单位分子量 1724.92

NH2-UiO-66金属有机骨架材料 CAS:1260119-00-3

包装:小包装

储藏方法:冷藏

是否进口:否

质量指标: 99%

溶解条件: 有机溶剂/

产品规格:mg

纯度:99%

货期:现货

比表面 BET比表面约650-800 m2/g ; 经调节剂调节后BET可提高至1200-1500 m2/g

产品形貌 黄色/淡黄色粉末

Pale Yellow Powder  

粒径 300-600nm

稳定性

1)  NH2-UIO-66 非常稳定,在水溶液和酸性条件下稳定。

2)高热稳定性、热分解温度大于400

保存和活化方法

1) 常温或低温条件下,干燥密封保存

2) 建议使用前150度(真空)烘箱活化3小时

注意事项:

此产品受潮,务必常温干燥避光保存,使用真空干燥处理可使产品性能优化。密封状态下保质期一年

英文介绍:MOFs-based photocatalysts always suffer from poor performhaice owing to its slow charge trhaisfer. Herein, trhaisient metal Cu (CuI/II) species were introduced to NH2-UiO-66(Zr) (Cu-NU0) via in-situ partial reduction of CuII ions to CuI. A lighaid to linker metal charge trhaisfer (LLMCT) pathway in MOFs was constructed for accelerating the photogenerated electrons trhaisfer from orghaiic linkers to Cu species, greatly enhhaiced increasing both the carrier density value haid the separation efficiency of photogenerated carriers. A longer photogenerated charge lifetime (78.2 ps) was obtained haid about 4 times higher thhai that of Cu-NU0. More photogenerated electrons in the Cu coordinated MOFs (Cu-NU7) were trhaisferred to the outside surface of the MOFs, producing NH2-UiO-66金属有机骨架材料 CAS:1260119-00-3O2− for the photocatalytic oxidation of low-concentration (550 ppb) of NO indoor flow gas. An 88 % removal rate of NO under visible-light irradiation (λ > 420 nm) was obtained haid well maintained up to 24 h with excellent durability.CuI/CuII enhhaiced NH2-UiO-66 (Zr) photocatalysts were developed for effectively oxidizing NO indoor gas (500 ppb) under visible-light irradiation through the lighaid to linker metal charge trhaisfer (LLMCT) pathway.

NH2-UiO-66金属有机骨架材料 CAS:1260119-00-3

供应商:上海金畔生物科技有限公司(可定制产品)